ST XTA Coilover Kit Ford Focus RS

For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster! *Performance driving in mind* ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. *Easy lowering adjustment* Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory. *KW Engineering: Exclusive for ST suspension* The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions. * Latest damping technology for maximum longevity * Reduced system friction for effective damping adjustment * Individual lowering within the TÜV-tested adjustment range * Front and rear axle (when possible) with thread adjustment * Galvanized coilover struts with additional coating for an optimized corrosion protection * Complete solution with adjustable spring plate, race spring system and bumpers with dust protection * Aluminium adjustable uniball top mounts (when possible) * Scaled camber adjustment (optionally also caster) * Externally adjustable damping Features and Benefits Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable. 5 Year Limited Warranty - Unlimited Mileage Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup. ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels. ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it's making the proper forces before being put into the ST box. Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength. Seamless Ride Height Adjustment - ST's composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look. Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability. Galvanized steel housing for improved resistance to corrosion. Made in Germany